Create a preset with multiple changes to individual channel of a fixture

Anything & everything relating to ENTTEC DMXIS.
Post Reply
spivey
Posts: 2
Joined: Sun Oct 06, 2019 5:51 pm

Create a preset with multiple changes to individual channel of a fixture

Post by spivey » Sun Oct 06, 2019 7:46 pm

Hi, I have a scanner that I'd like to pan across, stop part way and tilt up and down,
resume panning across, stop part way and tilt up and down, resume panning and stop.
Then repeat the movement in reverse while changing colors. How would this be
accomplished in DMXIS? Thanks.

RichG
Posts: 130
Joined: Mon Nov 24, 2014 8:19 am

Re: Create a preset with multiple changes to individual channel of a fixture

Post by RichG » Wed Oct 09, 2019 8:15 pm

Unfortunately, this isn't something DMXIS can do within one preset. This would take a series of presets to accomplish.
I've been hoping to get this feature for quite some time. I added it to the Show Buddy Active Wish List a while ago.

A simple controller like the Chauvet Obey 70 can do this. You can create scenes, then link them together into a chase.

spivey
Posts: 2
Joined: Sun Oct 06, 2019 5:51 pm

Re: Create a preset with multiple changes to individual channel of a fixture

Post by spivey » Thu Oct 10, 2019 12:08 am

Thanks RichG. I figured as much. I was hoping I was overlooking something.

Steve E
Posts: 22
Joined: Tue Aug 27, 2019 7:35 am
Location: Perth, Western Australia

Re: Create a preset with multiple changes to individual channel of a fixture

Post by Steve E » Thu Oct 10, 2019 3:36 pm

This is why we require assignable preset-loops or, preferably, a series of definable preset loops within a bank :)

Post Reply