Visualizer Error

Chat about Show Buddy Active - lighting & video control software
Post Reply
cgrafx
Posts: 110
Joined: Sat May 28, 2016 8:52 pm

Visualizer Error

Post by cgrafx » Wed Jun 05, 2019 2:25 am

I've got a Chauvet Vesuvio II Fogger with 2 Light Zones (RGBAUV)

I've created a fixture profile that correctly splits the light into two elements in the visualizer but the first Amber channel lights up on both fixtures and the 2nd amber channel doesn't do anything.

I swapped out a W for the UV so I can see the UV channel in the visualizer, and all other channels are displaying correctly.

I get separate control for R, G, B, and W (UV) and all work properly with the Dimmer Channel.

Here is the profile I am using.

FOG
S,0,9,Off
S,10,255,On
R
S,0,14,Off
D,15,255,Dim
G
S,0,14,Off
D,15,255,Dim
B
S,0,14,Off
D,15,255,Dim
A
S,0,14,Off
D,15,255,Dim
W UV1
S,0,14,Off
D,15,255,Dim
R
S,0,14,Off
D,15,255,Dim
G
S,0,14,Off
D,15,255,Dim
B
S,0,14,Off
D,15,255,Dim
A
S,0,14,Off
D,15,255,Dim
W UV2
S,0,14,Off
D,15,255,Dim
CMix
S,0,9,Off
V,10,255,CMix
A SPD
S,0,9,Off
D,10,255,SPD
STRB
S,0,9,Off
D,10,255,SPD
Dim
S,0,14,Off
D,15,255,Dim

Post Reply