Hi, Here is my problem.
My presets (in bank) seems to change when the synthetiser (korg krome) is sending program change (and the banks too, with changing banks), and not with "note on" as noted in the manual.
Thank you,
Pierre,
(France)
how to choose preset via midi notes
-
- Posts: 2131
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 6 times
- Been thanked: 18 times
Re: how to choose preset via midi notes
Check that you are transmitting the notes on channel 16, and at full velocity.
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Re: how to choose preset via midi notes
Salut Pierre
Make sure also that you haven't set the midi learn feature on the preset/bank up down buttons, this could be listening to the CC output of your synth.
Make sure also that you haven't set the midi learn feature on the preset/bank up down buttons, this could be listening to the CC output of your synth.
"if I'd have known I was gonna live this long Id have took better care of myself !!"
http://www.outlaw.fr
http://www.outlaw.fr
Re: how to choose preset via midi notes
Thank you,
It's allright now.,.
Bank 1 called with note C0, channel 15
Bank 2 called with noteC#0, channel 15 etc...
Pattern 1 called with note C0, channel 16
Pattern 2 called with note C#0, channel 16, etc...
but 2 problems :
1 :The color of the pattren called is sometimes imprecise.
red is sometimes red, or with a bit of blue, sometimes black ?!?!
2 : the Program Change are always also calling the pattern
Progran Change Piano 1 calling Pattern 1
Program Change Piano 2 calling Pattern 2
Thank you for your help,
Pierre
It's allright now.,.
Bank 1 called with note C0, channel 15
Bank 2 called with noteC#0, channel 15 etc...
Pattern 1 called with note C0, channel 16
Pattern 2 called with note C#0, channel 16, etc...
but 2 problems :
1 :The color of the pattren called is sometimes imprecise.
red is sometimes red, or with a bit of blue, sometimes black ?!?!
2 : the Program Change are always also calling the pattern
Progran Change Piano 1 calling Pattern 1
Program Change Piano 2 calling Pattern 2
Thank you for your help,
Pierre