I’m at a loss here. Please help if y’all can.
I have purchased, downloaded and launched showbuddy active with showbuddy setlist. All of my wav files and lighting cues auto loaded into setlist just fine. However my “lighting banks” are all missing. So, I had banks like ‘blackout’ momentary strobes, full scenes etc…
The pop up box reads “Problems were detected in the light show…and then goes on to list all the missing lighting banks.
I was hoping that moving from DMXis over to this SBA format would have been more seemless. Any assistance would be appreciated.
Thanks!
-Brian
DMXis to showbuddy active “scenes”
-
- Posts: 14
- Joined: Fri Mar 07, 2014 6:24 am
-
- Posts: 2135
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 6 times
- Been thanked: 18 times
Re: DMXis to showbuddy active “scenes”
Start the Show Buddy Active app, and choose File > Import DMXIS Data... from the main menu.
You'll need to spend a bit of time then laying out the fixtures on the visualiser. Also, some of your fixture definitions might need tweaked to work properly with the visualiser.
You'll need to spend a bit of time then laying out the fixtures on the visualiser. Also, some of your fixture definitions might need tweaked to work properly with the visualiser.
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon