2 fixtures with same dmx address

Chat about Show Buddy Active - lighting & video control software
Post Reply
Posts: 8
Joined: Tue Nov 15, 2016 5:26 pm

2 fixtures with same dmx address

Post by mikkjr » Mon Sep 09, 2019 4:59 pm


‪I want to "mirror" some of my fixtures‬

‪In practice I give my physical fixtures the same dmx address. No problem‬

‪The problem is that want to use 2d visuializer‬


Posts: 3
Joined: Sat Dec 28, 2019 1:32 pm

Re: 2 fixtures with same dmx address

Post by kungfire » Sat Dec 28, 2019 1:38 pm

I have the same issue here.
My attemt to get a workaround for this was to put the same fixture on another channel far away (let's say on channel 200, while my original fixture is on channel 10), and then patch the channels so the second one does the same as the first one. Unfortunately this didn't seem to work as neither the fades nor the 2D viewer shows the same behavior.

It would be great if anyone has an apporopiate workaround for this problem!

Post Reply