[WISH 2.0.11] Define channel for Preset & Bank Changes

Post your requests for new features here! One wish per topic please.
Post Reply
RichG
Posts: 206
Joined: Mon Nov 24, 2014 8:19 am

[WISH 2.0.11] Define channel for Preset & Bank Changes

Post by RichG » Fri Dec 07, 2018 9:57 pm

I use a midi controller to select Banks and Presets during a live show. A Bank Change message (0xBn) changes the Bank, and a Program Change (0xCn) changes the Preset. DMXIS & Show Buddy Active both respond to changes in BC or PC messages regardless of channel. I'd like to specify the channel used for these messages.

SWR
Posts: 29
Joined: Sun Apr 17, 2016 9:03 am

Re: [WISH 2.0.11] Define channel for Preset & Bank Changes

Post by SWR » Tue Dec 11, 2018 10:33 pm

Idea to augment the MIDI controls:
Have MIDI commands to emulate the footswitch commands.

My problem is that two switch outputs on my guitar floor board (Line6 Helix) can't be configured as momentary outputs - they are latching outputs. That makes it very difficult to make short and double clicks, and you always have to click twice for a long click. :(

If we could have two separate MIDI commands as an alternative to the two switch inputs, i could save two external momentary switches and clean up my floor board layout. :)

Post Reply