[WISH 2.0.11] Define channel for Preset & Bank Changes
[WISH 2.0.11] Define channel for Preset & Bank Changes
I use a midi controller to select Banks and Presets during a live show. A Bank Change message (0xBn) changes the Bank, and a Program Change (0xCn) changes the Preset. DMXIS & Show Buddy Active both respond to changes in BC or PC messages regardless of channel. I'd like to specify the channel used for these messages.
Re: [WISH 2.0.11] Define channel for Preset & Bank Changes
Idea to augment the MIDI controls:
Have MIDI commands to emulate the footswitch commands.
My problem is that two switch outputs on my guitar floor board (Line6 Helix) can't be configured as momentary outputs - they are latching outputs. That makes it very difficult to make short and double clicks, and you always have to click twice for a long click.
If we could have two separate MIDI commands as an alternative to the two switch inputs, i could save two external momentary switches and clean up my floor board layout.
Have MIDI commands to emulate the footswitch commands.
My problem is that two switch outputs on my guitar floor board (Line6 Helix) can't be configured as momentary outputs - they are latching outputs. That makes it very difficult to make short and double clicks, and you always have to click twice for a long click.
If we could have two separate MIDI commands as an alternative to the two switch inputs, i could save two external momentary switches and clean up my floor board layout.