[WISH 2.0.9] Virtual Faders

Post your requests for new features here! One wish per topic please.
RichG
Posts: 255
Joined: Mon Nov 24, 2014 8:19 am
Has thanked: 1 time

[WISH 2.0.9] Virtual Faders

Post by RichG »

Create Virtual faders that allow control over multiple faders (For fixtures without a master dimmer)
vwodwo22
Posts: 33
Joined: Thu Jul 25, 2019 1:36 am
Location: San Antonio, Texas

Re: [WISH 2.0.9] Virtual Faders

Post by vwodwo22 »

+1
RichG
Posts: 255
Joined: Mon Nov 24, 2014 8:19 am
Has thanked: 1 time

Re: [WISH 2.0.9] Virtual Faders

Post by RichG »

Bumping this one up since I ran into recent case where I could have used it.

I have several pars with a 'Dim' channel In my lighting rig. I also have several other effects lights such as Movers and Scanners with a 'Dim' channel. I typically run my Master at 0.3. Problem is, my Movers don't create a nice beam when set that low. I'd like to have 'master control' over the pars and movers separately.

Having a 'Virtual Master Fader' group where I could assign all my front pars to VMF1, all my back pars to VMF2, the Movers on VMF3, etc... would solve this problem.

I tried Patching, but it doesn't do what I want. It sets the channel equal to whatever the Patched channel is.

To take it a step further, you could have assignable color codes per VMF.
Post Reply