Hi!
I’m no lighting expert, but I’m really struggling with running a Martin Atomic 3000 DMX fixture with DMXIS.
Have tried several different versions from the library - 1, 3 and 4 channel. Have also tried writing my own from the instruction manual. Nope. Even quadruple checked the dip switches. Not working.
All of my other lights are fine - including Atomic 3k LEDs.
Could it be that I purchased a busted used unit? Or am I missing something here?
Thanks in advance for your patience and guidance.
Martin Atomic 3000 DMX. Help!!!
Re: Martin Atomic 3000 DMX. Help!!!
Set the dmx address on the strobe to 1, plug it in and run up the 1st four faders in DMXIS.
You don't have to assign a profile to the faders. DMXIS will still output DMX data without a profile assigned.
If nothing happens, you likely have a defective light.
You don't have to assign a profile to the faders. DMXIS will still output DMX data without a profile assigned.
If nothing happens, you likely have a defective light.