Martin Atomic 3000 DMX. Help!!!

Chat relating to fixtures.dmxis.com, the fixture editor for all our lighting products.
jfeltz13
Posts: 2
Joined: Mon Apr 02, 2018 10:44 pm

Martin Atomic 3000 DMX. Help!!!

Post by jfeltz13 »

Hi!

I’m no lighting expert, but I’m really struggling with running a Martin Atomic 3000 DMX fixture with DMXIS.

Have tried several different versions from the library - 1, 3 and 4 channel. Have also tried writing my own from the instruction manual. Nope. Even quadruple checked the dip switches. Not working.

All of my other lights are fine - including Atomic 3k LEDs.

Could it be that I purchased a busted used unit? Or am I missing something here?

Thanks in advance for your patience and guidance.
cgrafx
Posts: 176
Joined: Sat May 28, 2016 8:52 pm

Re: Martin Atomic 3000 DMX. Help!!!

Post by cgrafx »

Set the dmx address on the strobe to 1, plug it in and run up the 1st four faders in DMXIS.

You don't have to assign a profile to the faders. DMXIS will still output DMX data without a profile assigned.

If nothing happens, you likely have a defective light.
jfeltz13
Posts: 2
Joined: Mon Apr 02, 2018 10:44 pm

Re: Martin Atomic 3000 DMX. Help!!!

Post by jfeltz13 »

That 100% worked. Thank you!
Post Reply