Value is 100 not 255
-
- Posts: 2
- Joined: Tue Sep 13, 2016 7:53 pm
Value is 100 not 255
I tried looking through older post but cant seem to find the answer. I made a generic fixture for a RGB+W strip light I'm using but after I import it the value tops out at 100 on the slide scale. Anyone know where I went wrong or a 4 channel fixture I can download?
-
- Posts: 2131
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 6 times
- Been thanked: 18 times
Re: Value is 100 not 255
DMXIS faders display values as a percentage (0-100%) but the corresponding DMX values transmitted are 0-255.
You can see both the percentage and absolute DMX value being transmitted in the display at the top of the screen as you drag the slider.
You can see both the percentage and absolute DMX value being transmitted in the display at the top of the screen as you drag the slider.
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
-
- Posts: 2
- Joined: Tue Sep 13, 2016 7:53 pm
Re: Value is 100 not 255
I just want a 4ch 0-255 program for a fixture. All my colors are set off of 255 values. I prefer to type the number in rather than slide
-
- Posts: 2131
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 6 times
- Been thanked: 18 times
Re: Value is 100 not 255
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Re: Value is 100 not 255
How about for DPRO?
I can't seem to get any traction on that and it is really annoying not being able to see the exact DMX number vs %!
--Joe
I can't seem to get any traction on that and it is really annoying not being able to see the exact DMX number vs %!
--Joe