EYourlife 200 MHL profile

Chat relating to fixtures.dmxis.com, the fixture editor for all our lighting products.
archtriton
Posts: 4
Joined: Wed Nov 04, 2015 10:04 pm

EYourlife 200 MHL profile

Post by archtriton »

I picked up a few EYourLife 200W MHL and I found some Beam 200 which is what they are under the Chinese section of D-Pro, but they don't have a very good interface when programing X\Y grid for moving ect. Does anyone have a good profile for this? A profile for Songxu Sharpy Beam 200W might also work.

I'm going to try the Elation Design Spot 250 once the fixtures arrive to see how close they are but if anyone has a good profile, that would be prime.

Thanks
-Tim
archtriton
Posts: 4
Joined: Wed Nov 04, 2015 10:04 pm

Re: EYourlife 200 MHL profile

Post by archtriton »

I was able to find a profile that works in the data base however, it uses a Pan \ tilt fader bar not a X\Y axis grid, how hard is it to change to that. Also the effects (can can, fig8 ect.) doesn't seem to work with this fixture, does anyone have an idea what i could try to do?

I'm very new at this whole thing.
Post Reply