Hello-
Using the FCB, I am having some confusion with choosing to use note on commands or CC#22.
I would prefer the quickest and easiest way.
I am also using the FCB-Uno Controller software.
When programming a preset for the FCB, if I use the Note on option, it only seems to use 0-127, not C0, C#0 etc.
How do these numbers correlate with DMXIS?
There also only seems to be ONE Note command per preset. Don't I need to send one for the Bank and one for the Preset in DMXIS?
If I use CC#32 to send a MIDI message, how does that select a Bank and Preset in DMXIS?
Thank you!
DMXIS with FCB-1010
-
- Posts: 2131
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 6 times
- Been thanked: 18 times
Re: DMXIS with FCB-1010
Note 0 loads the first bank/preset, Note 1 loads the second, and so on.
Yep - send a note on MIDI channel 15 to change bank, and one on MIDI channel 16 to change preset.There also only seems to be ONE Note command per preset. Don't I need to send one for the Bank and one for the Preset in DMXIS?
CC#32 is MIDI bank select, this will change the current DMXIS bank. MIDI Program Change messages will change the DMXIS preset.If I use CC#32 to send a MIDI message, how does that select a Bank and Preset in DMXIS?
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon