Reverse The direction of a chase

Anything & everything relating to ENTTEC DMXIS.
Post Reply
floodstage
Posts: 24
Joined: Tue Feb 19, 2019 2:37 am

Reverse The direction of a chase

Post by floodstage » Mon May 20, 2019 4:43 am

Is there a "reverse" option somewhere on chases that reverses the direction that the lights chase in?

I have 16 lights in a row.
If I set up a chase on the 8 lights on the right, and that chase goes right to left (start at the outside and chasing into the middle) , how do I make a chase that does the EXACT (not similar, EXACT) same thing, except left to right on the other side.

I want the lights to chase to the both sides into the middle, and sort of "collide" into each other.

Dave Brown [admin]
Posts: 1798
Joined: Sat Sep 15, 2012 4:53 pm

Re: Reverse The direction of a chase

Post by Dave Brown [admin] » Mon May 20, 2019 12:48 pm

Just select the channels, then set the Chase knob to the upper half of its range.

For example, if you have 8 channels selected:
  • The Chase range is 0.0-8.0.
  • 0.0-4.0 runs chases in one direction.
  • 4.0-8.0 runs chases in the opposite direction.
Dave Brown - db audioware
Author of DMXIS | D-Pro | Show Buddy | Show Buddy Active | ArtNetMon

Post Reply