Deselect ???

Anything & everything relating to ENTTEC DMXIS.
Post Reply
Posts: 10
Joined: Tue Feb 19, 2019 2:37 am

Deselect ???

Post by floodstage » Fri Apr 12, 2019 4:56 am

Lets say I want to set up a huge chase, so I select 72 channels in a row by pressing on the first channel, holding shift and selecting the last channel.

Now all 72 channels are highlighted.

The Question, How do I unselect 4 of those channels?

In normal programs, you would just hold the control key and then select the channels you want to un select.

How do you do it.

I want to chase the fixtures, but I don't want the slider that selects strobe, to be part of the chase.

Posts: 94
Joined: Mon Nov 24, 2014 8:19 am

Re: Deselect ???

Post by RichG » Mon Apr 15, 2019 5:17 pm

There isn't a way that I know of to deselect a single channel. You have to start all over again by clicking the "DMXIS" logo in the upper left corner to deselect all, then start over again.

If you have a particular group of channels that you select repeatedly, a macro could be written to take care of the task.

Just use the SelectCh( Ch, 1 ) for all the channels you want to select.

Post Reply