Turned on my lights to do some cueing and Show Buddy says there is no hardware! Check out the box and it's blinking. If I unplug the DMX feed to the lights they start going into show mode. There is DMX signal to the fixtures. But Show Buddy, SBA and DMXIS say there is no connection. This is not good.
Help!
Joe B
Lost my DMXIS box!!!
-
Dave Sunley
- Posts: 25
- Joined: Mon Mar 03, 2014 1:28 pm
Re: Lost my DMXIS box!!!
Probably just need to up-date the firmware. Used to happen to me quite a bit.
Re: Lost my DMXIS box!!!
BAH!!
Mojave strikes again!
As with some other hardware/software issues I have had doing a restart doesn't fix it. Needed to do a shutdown and restart of the iMac then all was happy. Evidently Apple changed a lot about audio midi studio and sometimes it gets confused. I've had it not recognize my iPadPro until I did the shutdown/restart. Thanks for the suggestion though!!
best,
joeb
Mojave strikes again!
As with some other hardware/software issues I have had doing a restart doesn't fix it. Needed to do a shutdown and restart of the iMac then all was happy. Evidently Apple changed a lot about audio midi studio and sometimes it gets confused. I've had it not recognize my iPadPro until I did the shutdown/restart. Thanks for the suggestion though!!
best,
joeb