Split Signal To PA Weak

Chat about Show Buddy - show control software from db audioware.
Post Reply
DespyreMusic
Posts: 5
Joined: Wed Feb 06, 2019 12:08 pm

Split Signal To PA Weak

Post by DespyreMusic » Wed Feb 06, 2019 12:20 pm

Hey All
Trying to get a strong signal to the PA/Front of house...I have the tracks split click L intros right...click to drummer and intros to FOH, but the FOH signal is quite weak. Drummer is using a Mac with a headphone jack out to a Behringer XENYX 802 Mixer. Going in with 2 -1/4" jacks from Mac to channel 1 and 2 panned left and right, and going out to the headphones on "control room out" left and to the PA on "Main Out" right. were getting signal but its quite weak at the pa.
Anyone have any advice on the configuration or a suggestion on their own method?
Thanks!

DespyreMusic
Posts: 5
Joined: Wed Feb 06, 2019 12:08 pm

Re: Split Signal To PA Weak

Post by DespyreMusic » Mon Feb 11, 2019 12:22 pm

Quick update- My solution was to take the intro leg of the 1/4" Y to a direct box straight to the board and bypass the Mixer. Seems to do the trick.

Post Reply