In Show Control, can buttons be assigned to select fixture groups?(as in, the pre-assigned groups in the Library)
Let's say that is possible, can colours, dimming percentages, moving head position then be applied to the selected fixtures?
Thankyou
Show Control Workflow
-
- Posts: 36
- Joined: Sat May 30, 2020 2:40 am
- Has thanked: 3 times
-
- Posts: 36
- Joined: Sat May 30, 2020 2:40 am
- Has thanked: 3 times
-
- Posts: 25
- Joined: Thu Apr 14, 2022 6:42 pm
- Been thanked: 2 times
Re: Show Control Workflow
Pretty sure the answer is no... but it takes nothing at all to create a cue that uses your groups to select the fixtures and assign your palettes...
1. create a new cue
2. click on a group
3. drag the pallette onto the programming window
4. repeat as needed
5. save the cue
6. assign the cue to the show control button
1. create a new cue
2. click on a group
3. drag the pallette onto the programming window
4. repeat as needed
5. save the cue
6. assign the cue to the show control button
-
- Posts: 25
- Joined: Thu Apr 14, 2022 6:42 pm
- Been thanked: 2 times
Re: Show Control Workflow
oops, left out a step:
1. create a new cue
2. go into the edit mode of the cue by double-clicking it
3. click on a group
4. drag the palette onto the programming window
5. repeat as needed with other groups and palettes
6. save the cue
7. assign the cue to the show control button
1. create a new cue
2. go into the edit mode of the cue by double-clicking it
3. click on a group
4. drag the palette onto the programming window
5. repeat as needed with other groups and palettes
6. save the cue
7. assign the cue to the show control button