Show Control Workflow

RyanMcRobb
Posts: 36
Joined: Sat May 30, 2020 2:40 am
Has thanked: 3 times

Show Control Workflow

Post by RyanMcRobb »

In Show Control, can buttons be assigned to select fixture groups?(as in, the pre-assigned groups in the Library)

Let's say that is possible, can colours, dimming percentages, moving head position then be applied to the selected fixtures?

Thankyou
RyanMcRobb
Posts: 36
Joined: Sat May 30, 2020 2:40 am
Has thanked: 3 times

Re: Show Control Workflow

Post by RyanMcRobb »

I'll take that as a no!
zorpiedoman
Posts: 25
Joined: Thu Apr 14, 2022 6:42 pm
Been thanked: 2 times

Re: Show Control Workflow

Post by zorpiedoman »

Pretty sure the answer is no... but it takes nothing at all to create a cue that uses your groups to select the fixtures and assign your palettes...

1. create a new cue
2. click on a group
3. drag the pallette onto the programming window
4. repeat as needed
5. save the cue
6. assign the cue to the show control button
zorpiedoman
Posts: 25
Joined: Thu Apr 14, 2022 6:42 pm
Been thanked: 2 times

Re: Show Control Workflow

Post by zorpiedoman »

oops, left out a step:


1. create a new cue
2. go into the edit mode of the cue by double-clicking it
3. click on a group
4. drag the palette onto the programming window
5. repeat as needed with other groups and palettes
6. save the cue
7. assign the cue to the show control button
Post Reply