Hello,
I have two different model of moving lights that D-Pro seems to be handling oddly.
These lights need to have their Shutter (one model) or Strobo (other model)set to %100 as a precondition that the light with work.
1. From these values I create an "ON" pallet for the respective light.
2. I add up the Dimmer parameter and it's working fine, from %0-%100. I turn off the Shutter/Strobo and make sure that only "Dimmer" is displayed before I save the Pallet/Cue as "Dimmer".
3. Now I have two pallets, each with a single parameter. I close the programmer.
4. I open Show Control and assign the "ON" pallet to a button and the "Dimmer" control to a fader.
5. I press on.
6. I move the dimmer fader, it's working fine, except that on %0 I see %100 brightness from the lamp!
7. I have tried all combinations of "Override" for these assignments.
Help!
%100 seen brightness with dimmer on %0, only in Show Control window
-
- Posts: 2
- Joined: Wed May 20, 2020 11:59 am
-
- Posts: 2123
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 5 times
- Been thanked: 17 times
Re: %100 seen brightness with dimmer on %0, only in Show Control window
I would need a copy of your show file to diagnose that one.
However, you might find it easier to simply define a default value of 100% for the Shutter & Strobo channels in the fixture definition. That way, D-Pro will set those channels to 100% as soon as you open the show. You can then remove those channels completely from your programming.
However, you might find it easier to simply define a default value of 100% for the Shutter & Strobo channels in the fixture definition. That way, D-Pro will set those channels to 100% as soon as you open the show. You can then remove those channels completely from your programming.
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
-
- Posts: 2
- Joined: Wed May 20, 2020 11:59 am
Re: %100 seen brightness with dimmer on %0, only in Show Control window
The problem occurs when I'm changing the Dimmer value, therefore It's hard for me to believe that a change in the Shutter/Strobo channel defaults will resolve the issue.
Where should I send the file to?
Thanks
Where should I send the file to?
Thanks
-
- Posts: 2123
- Joined: Sat Sep 15, 2012 4:53 pm
- Has thanked: 5 times
- Been thanked: 17 times
Re: %100 seen brightness with dimmer on %0, only in Show Control window
Dave Brown - db audioware
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon
Author of Show Buddy Setlist | Show Buddy Active | ArtNetMon